Elecbrakes Portable Electric Brake Controller Trailer Mounted

The Elecbrakes system is designed to be installed on a trailer and does not require any modification to the tow vehicle.

Elecbrakes Bluetooth electronic brake controller is revolutionising the towing process by eliminating the need for modification to your tow vehicle. Designed and assembled in Australia, this simple-to-use brake controller can be fitted to any trailer. It is controlled through Bluetooth and can be synced to any Smartphone device or the optional EB Controller mentioned below.

?Elecbrakes employs a high-speed microprocessor and various sensors which continuously sample the operating parameters at over 1,000 times per second. For communication, the device uses the widely adopted Bluetooth 4.0 standard, and the hardware selections yield a Bluetooth device that has long range capability ensuring high connection reliability and no dropouts under typical operating conditions. This ensures the device can be mounted anywhere on the trailer’s draw bar.

?The Elecbrakes app provides the user with the ability to monitor, configure programs and control brake response from the tow vehicle.

?Elecbrakes is normally powered via the tail lights, however a second prefered Auxillary Power Input from the battery is also provided if the user has a prime towing vehicle. The system has been designed to continue operating even if the Bluetooth signal is interrupted or lost.

?Housed in a tough fibre reinforced housing and encased in urethane, ensuring the electronics are fully protected from water, dust and vibration.

Configured To Your Trailer – The Elecbrakes system stores settings and programs on your trailer for easy access by any op